☀️ Can T Connect Ps4 Controller After Reset

Double-check the USB cable that connects your PS4 controller to your PS4 console. Ensure that there is no loose connection. Disconnect the USB cable from your controller and console for 15 seconds and reconnect it. Wait 15 to 30 seconds to see if your PS4 controller will work while the console is in safe mode. Step 3. Reset the Controller. The blinking blue light on your PS4 controller is likely a pairing issue. Thankfully, this issue can be quickly resolved by manually resetting your controller: Turn your PS4 controller over. You should see four screws. Locate the reset button, which is found in a hole next to the upper right-hand screw. After finecking with this for a while and resetting the controller a bunch of times - Now Windows simply won't even see it as a device on Bluetooth despite me putting the controller in pairing mode. It works just fine with a PS4 But PC won't see it on Bluetooth Update #2: Tried with my other PS4 controller and that just connected fine. If you’re having issues with your controller, often the first troubleshooting step is to reset your controller. Turn off your PS5 console or PS4 console. Locate the small reset button on the back of the controller. Use a pin or similar tool (not included) to press and hold the reset button. Connect the controller to your PS5 console or PS4 1. Turn off your PS4. (Make sure controller is not plugged in) 2. Find a paperclip or something to reset controller. (Under the L2 button) 3. Hold reset button for ten seconds. 4. Press and hold the Playstation button. It should turn your PS4 on. 2) If that doesn't work, Sony has this guide for syncing blue tooth devices: Go to Settings > Devices > Bluetooth Devices > Your Controller > Forget Device. Turn off your PS4. Connect the controller to the console using a USB cable. Press the PS button on the controller for about 3 seconds, and it should automatically pair. If the controller doesn't pair, you can pair it the normal way. 7. This will reset the controller to its factory settings. Update the controller's firmware. Go to Settings > Devices > Bluetooth Devices > Controller and select Update Firmware . Factory reset your PS4. This is a last resort, but it may fix the problem. To do this, go to Settings > Initialize > Initialize PS4 (Reinstall System Software). First I tried with a borrowed genuine ps4 dual shock controller and all seemed ok but didn’t use it for long. I then purchased a cheap Powerextra Ps4 controller which connected fine but after 10-30secs would lose connection. I sent it back for a replacement but that was the same. Then I found this post which solved the problem. This works for EMzVI.

can t connect ps4 controller after reset